Sunday, November 22, 2009

Gypsy Wagon Progress Report 11-22-09

This week I was able to build the floor frame and the frame for the back wall of the Cosmic Caravan. I started by doing a detailed drawing. I then figured out the materials list and ordered up the steel, which was delivered on Tuesday. The first thing I built was the framing for the floor. I plan to be able to remove the structure from the trailer so as to be able to use the flatbed trailer separately if I need it. This necessitates building a floor that is strong enough to hold weight when separated from the trailer. I used 1 1/2" square tubing for the floor frame. I built the frame to be 3/4 inch narrower than the trailer so it will not be too tight a fit when I slide the camper from the trailer.

Then, on Friday, I started building the back wall of the wagon. This is the wall with the door in it. It is at the very back of the trailer. The ceiling height should be 86 1/2 inches when furred out with wood on the inside. That's plenty tall. I made the door frame with an opening 24 inches wide by 77 inches tall. I framed two quarter-circle windows on each side of the door. There is also, framed into the back wall, an opening for removal of the compost from the composting toilet that will be installed later.

The back wall frame is made mostly out of 1" x 1 1/2" rectangular steel tubing. It allows for flooring that will total 1 1/2" in thickness. That's room for a layer of 3/4" plywood topped by 3/4" of whatever flooring material I use - probably a laminate wood-looking flooring of some kind.

On Saturday I finished the back wall frame and clamped it onto the trailer so I could see what it felt like to walk in the door. I think its going to work just fine. I spent an hour drawing up the plans for the front wall - the one that goes at the tongue end of the trailer. This wall will have window in it, a mounting beam for the bed platform, and two access doors to the space under the bed. I made sure there was room between these doors for two propane tanks to mount on the tongue of the trailer.

Today, I went out to a preview of what will be a huge yard sale once it's all organized. I found a couple of solar panels totaling about 100 watts and bought them. I can mount these on the roof and use them to charge the trailer's batteries. There is also a large, dead motor home that I think I can scrounge the kitchen stove and sink out of. There may also be a furnace in the motorhome I can snag. I will have to pay something for thes items but not near what they would cost new.

This is an exciting project for me. When I go to my shop it's hard to get on with my real work. I just want to work on the gypsy wagon all day!

5 comments:

Fayme Zelena Harper said...

I don't blame you. I've wanted one forever and I'd just want to work on it around the clock. Who made up that rule about work before play anyway?

Anonymous said...

Hi, I am hoping to make a Gypsy Caravan myself but using wood not metal as the framing. I'm thinking this must be possible even if the metal frame is stronger. What do you think?

Raef said...

Great job I have started mine some time ago and have hemmed in with life's little problems.I used 20x20 steel tube and it also comes off the trailer. Keep the weight down as it climbs as you do more There is some photos at http://imagineering-engineering.blogspot.com.au Cheers Iggle

hosteencrotchety said...

I am a few years late to this blog. Great work, hope to find the updates and a finished project.

hosteencrotchety said...

A wooden frame it the tradition and many are still rolling today. Your skill set will determine which frame material you choose. This one will be a family heirloom that will be rolling 150 years from now, with cosmetic updates and fabric changes.....